Elektrowerkzeuge Hydraulikwerkzeuge Pneumatikwerkzeuge deutsch englisch französich spanisch

 

Optimum for your application, with superior service lives

The large assortment of high-grade, forged electric chisels makes for economic and efficient working.

The shape of the working face decides the success of the work.

 

 

 


 

Laser engraving of your choice

For more information please go to the download section.


 

 

4

171

008

025

Four groups of digits form the ordering number for electric hammer tools:

4 171 008 025

stands for SOLIDA electric hammer tools

describes the shank, in this case SDS-plus

indicates the design of the working side, in this case bull point

designates the total length of the chisel, in this case 250 mm

SOLIDA relies on laser technology for labelling all electric hammer tools. And with your logo if desired.
 
SOLIDA electric hammer tools are only intended and suitable for use as designed in machines equipped with matching tool carriers. Please, observe also the machine manufacturers' operating instructions and safety notes. SOLIDA assumes no liability for misuse of this nature.

The right Tool for every Job

Gallery

 

To enlarge the pictures please move over

 

 
Bull point

for general chiselling and demolition work on masonry, concrete and loose stone

 
Flat chisel

for general chiselling and demolition work on masonry, concrete and loose stone with selective breaking action

 
Tile scaling chisel

for removal of tiles

 

Wide scaling chisel

for universal removal of materials on a larger scale

 
Tile scaling chisel angled

for simple removal of tiles, with ergonomically angled working face

 
Clay pick

for general garden and landscaping work, for digging in clay, compacted gravel and mud

 

Pointed spade

for general garden and landscaping work, for digging in clay, compacted gravel and mud

 
Hollow gouge

for gouging narrow channels in concrete

 
Channel chisel

for gouging channels in masonry, e.g. bricks, sand-lime brick

 
Variable channel chisel with glides

for working sand-lime brick, brick and pumice, ideal for variable channel depths due to sliding guides and subsequent chiselling of junction boxes and power outlets without any changing of tools

 
Slotting tool with carbide

for seam removal, removal of intact bricks, removal of tiles and layers of plaster

 
Slotting tool

for removing seams and/or renovating masonry

 
Asphalt cutter

for use in road construction and hard soil for renovating asphalt surfaces

 
One piece bushing tool

for roughing work when renovating concrete and asphalt

 
Electrode driver

for mechanical driving of nails into the ground, e.g. for lightning arresters

 

tamping tool, plate incl. shank end

for compacting of soil, gravel, sand, bulk materials

 
Wood chisel

for woodworking

 
Shanks for the most common types of hammer

To enlarge the pictures please move over

 
  Shank suitable for
SOLIDA-part No.
 
SDS-plus - round body
4171 ... ...
 
SDS-plus - hexagon
4171 ... ...
 
SDS-max - (TE-Y Hilti)
4176 ... ...
 
SDS-top - (TE-T Hilti)
4182 ... ...
 
Ø 12 x 40 mm
4166 ... ...
 
Ø 13 x 45 / 17 mm
4255 ... ...
 
Ø 16,5 x 35 / 19 mm
4152 ... ...
 
19 mm
4153 ... ...
 
19 x 82 mm
4112 ... ...
 
Ø 16 x 45 / 20,5 mm
4257 ... ...
 
Ø 19 x 65 / 21 mm
4151 ... ...
 
22 mm / 6 recesses (TE-S Hilti)
4186 ... ...
 
28 mm
4156 ... ...
 
Ø 24 x 55: 30 / Ø 26 mm
4164 ... ...
 

 

EMail schreiben an Solida zum Seitenanfang