Solida PneumaticLine

Home

SOLIDA

Optimum for your application with superior service lives

Precise forging technology is used to give the working faces of all our pneumatic chisels their optimum form.

Consistent quality controls in each stage of production result in the enormous stability of our chisels.

For cost-efficient and fast work.

Precision-forged - perfect for your job

Laser engraving of your choice

For more information please go to the download section.

102

010

038

Four groups of digits form the ordering number for pneumatic breaker tools:

1 102 010 038

stands for SOLIDA pneumatic breaker tools

describes the shank, suitable for 22 x 82 mm hex

indicates the design of the working side, in this case bull point

designates the effective or total length of the chisel, in this case 380 mm

SOLIDA relies on laser technology for labelling all pneumatic breaker tools. And with your logo if desired.

SOLIDA pneumatic breaker tools are only intended and suitable for use as designed in machines equipped with matching tool carriers. Please, observe also the machine manufacturers' operating instructions and safety notes. SOLIDA assumes no liability for misuse of this nature.

The right Tool for every Job	Gallery	To enlarge the pictures please move over
	Bull Point	for demolition work, openings in concrete, bricks etc. Removal of loose stone
	Flat chisel	for demolition work, openings in concrete, bricks etc. Removal of loose stone with selective breaking action
	Long scaling chisel	for removing material on a larger scale e.g. screed topping, for easy breaking up of asphalt, work in slightly frozen ground
	Clay Pick	for use in road construction, cuts asphalt or hard soil
	Digging Chisel	for universal digging in soil and loose stone, cuts thick asphalt
	Long scaling chisel, angled	for removing material on a larger scale e.g. screed topping, for easy breaking up of asphalt, work in slightly frozen ground
	Asphalt cutter	for heavy-duty road breaking, with high splitting strength
	tamping tool, forged plate incl. shank end	for compacting gravel, sand, bulk material and soil

A matching shank for every hammer:		To enlarge the pictures please move over
	SOLIDA-part No. 1100 ... ... 19 x 50 mm		SOLIDA-part No. 1053 ... ... 14,8: Ø 17,5 x 60 mm, collar 30 mm
	SOLIDA-part No. 1102... ... 22 x 82 mm		SOLIDA-part No. 1066 ... ... 17: Ø 20 x 60 mm, collar 30 mm
	SOLIDA-part No. 1105 ... ... 22 x 108 mm		SOLIDA-part No. 1004 ... ... Ø 25 x 75 mm
	SOLIDA-part No. 1106 ... ... 25 x 108 mm		SOLIDA-part No. 1361 ... ... Ø 25 x 75 mm, collar 38 mm
	SOLIDA-part No. 1107 ... ... 28 x 152 mm		SOLIDA-part No. 1362... ... Ø 27 x 80 mm, collar 34 mm
	SOLIDA-part No. 1108 ... ... 28 x 160 mm		SOLIDA-part No. 1334 ... ... 10: Ø 11,4 x 39 mm
	SOLIDA-part No. 1109 ... ... 32 x 152 mm		SOLIDA-part No. 1159 ... ... 13 mm with recess
	SOLIDA-part No. 1110 ... ... 32 x 160 mm
	SOLIDA-part No. 1050 ... ... 12,5: Ø 14,3 x 50 mm
	SOLIDA-part No. 1052 ... ... 12,4: Ø 15 x 55 mm